Sunday 2 February 2014

Minty Goat's Milk Soap Recipe With Mantra Swirl




This produces a wonderful smelling soap and the pastel colours compliment the fragrance beautifully. The goat's milk yoghurt produces a lovely bubbly bar of soap and the silk adds extra smoothness. You can leave out the soap and the colouring if you don't have those ingredients available to you.


This batch fills a mold size of 25x7x7.5cm and is superfatted at 5%

Ingredients

Olive oil 414g
Sunflower Oil 92g
Lard 276g
Coconut oil 46g
Palm oil 92g
Sodium hydroxide 122.485g
170g Goat's milk yoghurt
179.6g Distilled water
Large pinch of tussah silk
Green mica 1/4tsp mixed into 2ml olive oil
Blue Mica 1/4 tsp mixed into 2ml olive oil
Titanium dioxide 1/2 tsp mixed with 2ml olive oil
Spearmint Essential oil 10ml
Peppermint Essential oil 10ml
Aniseed essential oil 10ml

Method

Prepare your mold, either line it with waxed paper or petroleum jelly to help release the soap when it has hardened. Use plastic or cardboard sheets to make 4 divisions in your mold, I am lucky and my mold comes with acrylic sheets that slot into place. Now you are ready to start soaping. Heat the oils until melted, mix the sodium hydroxide and water together. Wait until the two portions cool down to 35C then mix the two parts together. Blend with a stick blender until the mixture reaches light trace. Add the titanium dioxide and yoghurt to the whole batch and mix thoroughly. (You will have to work fast from now on as the sugars in the goats milk will heat up the batter and you don't want brown soap!) Separate the batter into three containers, two with 1/4 batter in each and one with the remaining 1/2 of the batter. Add the green and blue mica to the two 1/4 batch containers. Fill up two of the mold sections with white mix and the other two with the coloured batter. Then gently remove the separating sheets. You should now have a mold filled with 4 stripes of differently coloured soap. Take a stainless steel skewer or piece of wire coat hanger and swirl it through the soap  in a figure of eight pattern wich will produce a mantra swirl pattern on the top of your soap.
Quickly move your mold into the fridge to make sure the soap doesn't overheat, and leave overnight to saponify. I took my soap out of the fridge the following morning but the soap was still too soft to unmold and cut so it needed to be left another two days to dry out before it was hard enough to cut.





No comments:

Post a Comment